Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Last Edit: April 26, 2019, 16:50:47 PM by Pilgrim
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Q2569
 - April 26, 2019, 16:25:36 PM

Hey All,
Having an issue with a 1999 Drifter 1500 clutch? I went for a ride this morning and fired her up, pulled in the clutch, placed into 1st and it lurched and died. I had issues getting it back into neutral but did after rocking back and forth. Wheeled into the garage and placed on the stand. Noticed the clutch felt spongy so I pulled MC off cleaned up real good, re-bled and it still feels spongy but noticed that the clutch is not disengaging the transmission when rolling through gears (up on the stand not running). Pulled slave cylinder off and it is stroking in/out as expected. The clutch rod cannot seem to be pushed by mortal means, but not sure if it can be done by hand. I also noticed that just trying to push transmission through the gears it is a bugger to get from first to second but will roll through all the rest of the gears fine but when down shifting from second to neutral to first, it is not as smooth as she used to be. I think the clutch MC/SC seem to be working and fluid return in MC is good. Before I tear the casing open wanted to throw it out to the masses to see if anyone has had something like this happen to them. :o
Thanks to everyone
~Q

SMF spam blocked by CleanTalk