Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Last Edit: November 20, 2018, 21:04:23 PM by paulfuller12
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by indue
 - November 17, 2018, 13:04:31 PM

Pull the light lense off and check the bulb. It should be an 1157 (dual filament). Put in a new one if the two filaments look separated or if there is a dark/smoke color to the bulb indicating they have burned out. Otherwise, it is in the connection above the drive shaft left side.

Posted by greenbarn
 - November 17, 2018, 07:15:53 AM

The wiring for all of the rear lights cluster into the tail light housing.  I'd take off he cover there and see what you have and what you don't have.  Do you have a 12V test light?

When you say you have a parking light, exactly what do you mean?

Posted by Troll
 - November 17, 2018, 04:03:14 AM

license plate light working? Brake light working?

Posted by paulfuller12
 - November 16, 2018, 16:21:51 PM

My 2000 has small turnsignals with no running lights can that cause no power to the tail light? I was looking at wiring diagram and the running light are in a circuit to the tail light. I have got parking light. Has thunder switch and tail light fuse is good. Any ideas?

SMF spam blocked by CleanTalk