GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by chief
- August 15, 2018, 12:30:28 PMYou are correct, the 56051-1810 is for the decal on the 46001-023 and 024 windshields (and all the wide band versions).
Posted by Pete
- August 15, 2018, 11:40:06 AMThe decals have arrived earlier than promised.
The outline is a little more noticeable than the original Kawasaki sticker, but good enough for me. I'm having trouble getting a photo of one on my new Rifle blade - too many reflections. I will post one when I manage to get a good shot.
Posted by Pete
- August 15, 2018, 11:32:47 AMQuote from: chief on August 14, 2018, 10:10:22 AMThanks again, that is very useful.I've gone back and researched the archives. I have been able to piece together some information.
Mine is K46001-023 (black version is 024).
Kaw (apparently) contracted with National Cycle to make the original shields. They created a "Vintage" model which had a certain shaped shield and the one inch strap.
In 2001, when Drifter went chrome, the decal was on the "new" shield. This was K46001-038.At some point, they added K46001-023 and 024 ( sometimes referred to as "Standard" model) to the F&S line. This had the wide band in either chrome or black and the shield shape was a different from 038. It also had 6 holes on the horizontal strap vs 5 on the 038.
Also, I see back in 2011 we had 4 NOS replacement plastic for 038 for sale, and these DID have the decal.
So for Drifters you could have either the 038 or 023/024. The 038 had decals, the 024 had decals for the wide band, but you paid $35 extra for them.
Back in 2007 I researched 800 shields for someone and came up with this:
The whole windshield is P/N - K46001-038 ($439.95)
The plastic is P/N - K46001-031 ($164.95)
The windshield emblem is P/N - 56051-1810 ($39.95)
For those searching for replacement plastic:The 038 is a 5 hole shield. 023 is a 6 hole shield. So for replacement plastic be sure you know which hardware you have.
You may find either of these on 800's or 1500's.
Rifle lists replacement plastic:
For 023/024:https://rifle.com/Vulcan%201500-800%20Drifter%20Standard%20(Kawasaki)%20Replacement%20Windshield%20(99-)-P2321.aspx
For 038:https://rifle.com/Kawasaki%20Vulcan%201500-800%20Drifter%20Vintage%20Replacement%20Windshield%20(99-)-P2340.aspx
I've just taken delivery of a Rifle replacement blade for my K46001-038, and I have to say I'm not particularly impressed. I'll put up a post describing the problems with it some time soon.
With regard to the -038 parts breakdown (which I'd picked up on in another forum with the help of the nice Mr. Google), 56051-1810 isn't the right number for the sticker. That 56051-1810 part number belongs to a large metal emblem that sits in the centre of the wide horizontal trim of a windscreen, and is listed as being for the VN1500-Gx and VN1500-Lx. I've seen a photo of one in a parts bag.
I'm also slightly skeptical about the number for the replacement plastic. I have tried, but been unable to verify it.
Posted by chief
- August 14, 2018, 10:10:22 AMI've gone back and researched the archives. I have been able to piece together some information.
Mine is K46001-023 (black version is 024).
Kaw (apparently) contracted with National Cycle to make the original shields. They created a "Vintage" model which had a certain shaped shield and the one inch strap.
In 2001, when Drifter went chrome, the decal was on the "new" shield. This was K46001-038.
At some point, they added K46001-023 and 024 ( sometimes referred to as "Standard" model) to the F&S line. This had the wide band in either chrome or black and the shield shape was a different from 038. It also had 6 holes on the horizontal strap vs 5 on the 038.
Also, I see back in 2011 we had 4 NOS replacement plastic for 038 for sale, and these DID have the decal.
So for Drifters you could have either the 038 or 023/024. The 038 had decals, the 024 had decals for the wide band, but you paid $35 extra for them.
Back in 2007 I researched 800 shields for someone and came up with this:The whole windshield is P/N - K46001-038 ($439.95)
The plastic is P/N - K46001-031 ($164.95)
The windshield emblem is P/N - 56051-1810 ($39.95) <Appears to be for wide band decal>
For those searching for replacement plastic:
The 038 is a 5 hole shield. 023 is a 6 hole shield. So for replacement plastic be sure you know which hardware you have.
You may find either of these on 800's or 1500's.
Rifle lists replacement plastic:
For 023/024:https://rifle.com/Vulcan%201500-800%20Drifter%20Standard%20(Kawasaki)%20Replacement%20Windshield%20(99-)-P2321.aspx
For 038:https://rifle.com/Kawasaki%20Vulcan%201500-800%20Drifter%20Vintage%20Replacement%20Windshield%20(99-)-P2340.aspx
Posted by Old Drifter
- August 12, 2018, 09:55:44 AMMine is also the 038 chrome trim like the first windshield. It had the Drifter decal.
Posted by Pete
- August 12, 2018, 06:31:04 AMThanks Chief.
All four of the windshields that I have found have the 038 style of trim, like the upper photo (the three 99990s are all the same except for the finish of the metalwork).
I've seen quite a few Drifters with the style seen in the lower photos, but haven't yet found paperwork that links them specifically to the Drifter.
I have identified at least one other windshield that will fit the brackets for the part numbers I've listed, and one or two more that will fit with spacers, and lots that won't fit - there are a LOT of Kawasaki windshields out there.
Could you do me a favour please and post a photo of the mounting brackets that you have and let me know the Kawasaki part number if you have it? In slow time I'm putting together an illustrated list of all the Kawa / F&S accessories that I can fine for the 800.
Posted by chief
- August 11, 2018, 16:01:23 PMI AM the only owner and I bought the windshield new from the Kaw dealer in 2002, but you sparked/refreshed my memory.
I have included pics below of F&S windshields we see on Drifters. (Disregard the plastic shapes.)
The first is likely the one you have and are referring to, and the one intended to have the decal. I think this was the 038 Drifter shield you mentioned. Lots of room for a decal!
The second is the one I and many others have on our Drifters. Not much space for decals on this shield. I've replaced the plastic twice, using plastic for the Drifter.
#3 is my bike.
We won't get into the different parts floating around Europe!! 
That decal would look good on the inside rear window of my truck!
Posted by Pete
- August 10, 2018, 17:07:22 PMQuote from: chief on August 09, 2018, 09:38:50 AMI believe that you are right that for the Drifter they are all accessories. I have only found four so far listed for the Drifter. One was the K46001-038 and the other three were 99990-114 A, B & C. All four come with the Drifter sticker.I'm sure people will be interested.
As you know no Drifters came with windshields, they were all add-on accessories. My Kaw F&S windshield didn't have a decal like that, but I have a 1500 and a 2002 so perhaps it was either 800 or year specific?
, not that it matters much. I have seen it before and It's a nice addition.
Keep us advised.
I have come to suspect that the 99990 series accessories were designed and/or made in Germany, but cant yet be certain. I also don't yet know for sure that the 99990 parts are F&S although they do turn up in what appears to be official Kawasaki catalogues.
I know that the blades with trim for the four kits above are interchangeable. I also know that other F&S windshield blades with trims listed for other bikes will fit the brackets from these four kits, although the screens have different profiles.
Perhaps you had a replacement blade (the clear plastic part in UK speak) or perhaps a previous owner had removed the decal (sticker).
The stickers are on order, so let's hope that they are good enough quality to grace our Drifters.
Posted by Old Drifter
- August 10, 2018, 15:43:02 PMWhen I found my Drifter windshield it was NOS in the box and came with all the mounting brackets. The windshield had the same "Drifter decal/sticker on it that Pete posted. Since the windshield was NOS, the place where it was stored caused the decal/sticker to shrink and deform. After I peeled it off, I used "GOO GONE" and a soft cloth to safely remove the glue left behind. GOO GONE is great stuff, it didn't harm the windshield in the least.
Posted by Bucko
- August 09, 2018, 23:50:08 PMI have a brand new original F&S Drifter windshield still in the box. Pretty sure the drifter emblem is on it - I'll need to take it out of the box to confirm. I always thought the emblem was engraved or embossed - but honestly never looked closely at it.
Posted by chief
- August 09, 2018, 09:38:50 AMI'm sure people will be interested.
As you know no Drifters came with windshields, they were all add-on accessories. My Kaw F&S windshield didn't have a decal like that,, not that it matters much. I have seen it before and It's a nice addition.
Keep us advised.
Posted by Pete
- August 09, 2018, 06:36:42 AMI'm keeping my E2 in its factory state. However, I am replacing the windshield blade because it's getting a bit dull and scuffed in places. I can't get a Kawasaki original blade, so I'm getting one from Rifle.
All four of the Drifter windshields of Kawa origin of which I am aware came with a Drifter Decal, and because I'm keeping mine original I'm getting a batch of repro decals made.
If they turn out to be of adequate quality I might offer them on the forum if there is enough interest. Please let me know if you might be interested.
The decal looks like this (reversed because it's stuck on the inside of the windshield):