Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by greenbarn
 - April 27, 2018, 21:34:49 PM

I have flushed both my 800 and 1500, had no issues, didn't have to do anything special to bleed them out. 

Posted by Stroker Deuce
 - April 27, 2018, 18:56:46 PM

I rode slowly through the down town section of a neighboring city only to have the high temperature light of my 2001 800 come on.  The radiator fan was not running which helped isolate the issue.  Removing the seat and fuel tank I checked the fuse then located the connectors for the fan and fan switch sensor.  Bypassing the sensor, the fan ran well which isolated the problem to the fan switch sensor.  This item from Ebay will be here this next week https://www.ebay.com/itm/RADIATOR-FAN-SWITCH-SENSOR-Fits-KAWASAKI-VN800-VULCAN-800-DRIFTER-1999-2006/281829373251?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 so I should be back on the road shortly there after.

My plan is to drain the cooling system before I replace the sensor, then flush the system with white vinegar and distilled water before replacing the coolant.

Does anyone have sage advice with any or all of this project?  Has anyone had issues with air getting trapped in the cooling system when refilling with coolant?  Any pitfalls I need to look out for?

SMF spam blocked by CleanTalk