Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by OR Seedman
 - April 26, 2018, 13:28:35 PM

here is the rack and backrest setup for the oem 2-up seat....rack is tilt adjustable and the backrest moves back and forth up to 3 inches (centered in the pictures)

Posted by OR Seedman
 - April 25, 2018, 23:50:53 PM

thanks...the backrest is attached via the underside of the rack.  There are 4 pre-drilled holes in the rack for attaching the backrest.  It can slide forwards and backwards up to 3" if you have the clearance.  Here is a pic of the backrest mount without the pad....

Posted by Bucko
 - April 25, 2018, 18:45:10 PM

Nice looking bags.

Posted by CDNRatMan
 - April 25, 2018, 13:24:49 PM

 ::)your girlfriend has a nice rack.....much nicer than yours anyway.

Posted by Pilgrim
 - April 25, 2018, 11:50:18 AM

That looks awesome..I can't tell by the pictures, how is the backrest bracket attached to the rack?
I have a Corbin solo with seat rail and the rail is in the way of installing the backrest square tube, I already have a rack and may be interested in a backrest like yours if I can attach it to my rack.

Posted by OR Seedman
 - April 25, 2018, 07:58:10 AM

really good...the back support, especially when using the highway pegs, is really nice...can ride all day and not get any tailbone ache.  We have been getting great weather (sunny and 78 F) so I have been putting some miles on the bike to get a good feel for it.....really liking the torque and power...

Posted by mittico68
 - April 25, 2018, 02:37:59 AM

Nice & neat!
It turned out really well. How about the comfort?

Posted by OR Seedman
 - April 24, 2018, 17:25:31 PM

As some of you may have seen, I designed a tilt adjustable rack and backrest mount for the 1500.  However, when I tried to use it with the seat rail mounted as well, it would not fit between the rear most rail mounts because they angle in as they go up to the rail.  Of course, when I designed the setup, I did not have the seat rail on the bike... :o.  So I came up with a new design that extends the rack back more and allows the mounts to fit between rear seat rail mounts.  this is how it turned out...

SMF spam blocked by CleanTalk