GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by chief
- March 10, 2011, 18:47:16 PMWell I do have a corbin two-up and have some US Cav horse saddle bags, a thermal bag and a backpack deal from my harley days that will fit the backrest on the rear seat. That helps a bunch. A windshield bag also helps.
Posted by emjayw
- March 10, 2011, 15:10:53 PMJust as well.... I consider my 800 a "solo" bike only. BTW: I wear a backpack while on trips and it's not half bad for carrying a few things... also, a smallish magnetic tank bag is a great thing to have when you actually travel other than around town. Mike in TX
Posted by chief
- February 28, 2011, 11:46:42 AM"Busy"... 
You don't see anything but the bags and the seat... same as with any "bag/seat" combo. The mounting is the same as with the oem seat.
I too prefer not to use bags... had Ospreys previously - sold them after a month or so. However, not having bags means I have to come up with other ways to carry stuff... just going to the PO or store means having to mount a back on the rear seat. Fortunately, my wife prefers not to ride the Drifter anymore (spoiled by the goldwing).
Posted by emjayw
- February 27, 2011, 19:22:25 PMTdowns, Yes, I am interested in selling both the mounts and bags. Mounts are new and unused. Bags were "used" by a PO who must've over filled them while using Scootworks mounts because they are slightly cracked around several of the mounting holes. Not broken, but cracked. Shouldn't be any problems using Osprey mounts as they sit in a different location and mount up tight on the inside and outside of each bag. I can't be sure, but from the looks of things the scootworks mounts don't appear to have had any inside stiffeners used around each hole. The bags have minor scrapes and a few scratched conchos from the PO's laydown. I'll sell 'em at a good price. PM me if you're interested. Mike in TX PS: Chief, I've looked at that solution and it just seems very "busy" to my eye. Besides...I like the naked bike look better on the Drifter.
Posted by chief
- February 27, 2011, 12:23:02 PMHave a look at this...
http://www.vulcandrifterriders.com/corbinosprey.html
Corbin solo and Osprey bags - no drilling.
Just a reminder ALWAYS look in the MODS/TIPS section of the website. There is a LOT of stuff over there that can be useful to you.
http://www.vulcandrifterriders.com/reviewpost/showcat.php/cat/47
Or just go to http://www.vulcandrifterriders.com and click on the button.
Posted by Tdowns
- February 26, 2011, 21:50:01 PMThanks Mike. Are you going to sell your mounts or mounts & bags?
Posted by emjayw
- February 26, 2011, 13:18:07 PMThe osprey mounts will work with the OEM seats, but not with my Corbin solo (at least not without drilling holes through the front hole locations. Ouch!) I have a nice set of tan ospreys with the Osprey mounts, but won't drill my corbin to mount them. (yes, the Corbin is so much better than the OEM solo that I prefer it.) (looks better too) Mike in TX
Posted by Tdowns
- February 20, 2011, 11:02:32 AMI recently bought a 2001 Drifter 800 with solo seat. I would also like to have a dual seat and saddlebags, so I have a couple questions.
It seems the mounts sold by Osprey (Treveleer) @ $99 that mount to the seat are the best value I've found. Is that correct?
My second question is will that mount fit both the single and dual oem seat? How about the Corbin dual seat?
I have read a lot on this site about bags and mounts and it seems some of the manufacturer's claims aren't accurate, so I'm asking the "experts" here. Thanks!