Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by moto
 - March 31, 2018, 09:49:29 AM
Quote from: Troll on March 30, 2018, 17:59:52 PM

The two pipes coming out are straight through. There are no baffles, just perf core pipes with steel pack around them. If you don't believe me, stick a LONG dowel down the pipe...I have 3 of these mufflers, and they are all the same.

Ok I know. But my question is: If I drill cirle around these pipes to the end - like my picture shows- , does the first "core" released easily with pliers then?
Posted by Troll
 - March 30, 2018, 17:59:52 PM

The two pipes coming out are straight through. There are no baffles, just perf core pipes with steel pack around them. If you don't believe me, stick a LONG dowel down the pipe...I have 3 of these mufflers, and they are all the same.

Posted by chief
 - March 30, 2018, 11:05:37 AM

Honestly don't know. I am wondering if the exhaust is the same as the US model. Does yours have a "goat bladder" underneath the bike? I am pretty sure someone on here has done this. Sorry we don't have a mod for that specifically.

Posted by moto
 - March 30, 2018, 07:35:36 AM

I take pic to my oem Drifter exhaust on the back. Does anyone have any experience, is this baffle
welded to anywhere other than just behind, as shown in the picture.

If I drill a circle around the two pipes, do I just take off the baffle with the pliers? Have any experiences?

SMF spam blocked by CleanTalk