Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by CDNRatMan
 - March 07, 2018, 23:46:27 PM

 :o  one teaser for you....

Posted by CDNRatMan
 - March 07, 2018, 15:49:30 PM

  Well my progressive rear shock came this morning and so one more step forward, then the people doing my cover called and said everything was done but the tank so I went to pick them parts up and when I got home the powder coater called to let me know that all my parts were done so in the morning off to collect those parts, so now just the custom seat frame and the seat getting reupholstered and we can slowly start to transformation.......

Posted by CDNRatMan
 - February 21, 2018, 09:19:37 AM

 :onTo which I really hope my favorite Aunt shows up and she can even drag her old man along.........

Posted by RockinRollin
 - February 21, 2018, 08:28:46 AM

Rendezvous in the Soo, that's kind of catchy! ;D

Posted by CDNRatMan
 - February 12, 2018, 17:54:40 PM

Well you did this correctly. Always use kerosene to rinse the forks out, as it will not harm the seals. I also have a pair of baby bottle brushes on a long wooden dowel........I poured out the old oil, poured in a bit of Kerosene and then ran the brushes up and down a few times, added some more kerosene and shook it up, careful ass it might expand forcefully. Then I drained them and hung them for a good overnight hanging. Also used 10w for the fork oil.
You should notice a nice ride, and perhaps time to take the grandson for a ride, bet he would be thrilled..........might consider bringing him to Rendezvous 19 in the Soo.......

Posted by Pilgrim
 - February 12, 2018, 15:48:33 PM

I know you was...I like your set up. I imagine the longer they drain the better. I dont know if this was proper but I rinsed mine out with kerosene then a final rinse with fork oil...then filled. Black gunk came out.
Went with 10w also.

Posted by CDNRatMan
 - February 12, 2018, 15:24:27 PM

     Mr. Pilgrim, I was watching wholesome American TV about your wonderful president and his ideas. I also left them hanging to drain properly, no rush in life it is to short to rush around......

Posted by Vulcanpunch
 - February 12, 2018, 13:50:32 PM
Quote from: Pilgrim on February 12, 2018, 13:22:48 PM

you watchin' a porno while you drain your tubes?  8)

In my opinion that's the best way to drain a tube...

Posted by Pilgrim
 - February 12, 2018, 13:22:48 PM

you watchin' a porno while you drain your tubes?  8)

Posted by Vulcanpunch
 - February 12, 2018, 13:06:27 PM

You were talking about your solo seat and wanting to do some modifications to it. What where you looking to do? I'm assuming this is on pearl.

Posted by Vulcanpunch
 - January 28, 2018, 21:15:19 PM

Ok that makes more sense. Thanks for clarifying that.

Posted by CDNRatMan
 - January 28, 2018, 18:03:43 PM

  You are correct in that the 1500 and 800 front ends are near interchangeable. The extra 0.5" on the spacer is for personal preference. On Red I had added 1/4" more and found that it carried my weight better and as a 2 up rider it was that much better in my opinion. So when I decided to build Pearl to the theme I am going with and as a solo rider I opted for a stiffer ride.
When I did Red a few years ago I called and talked to the techs at progressive and they were extremely helpful, we talked about body weight and what I was after and they had a few suggestions. On the rear shock I added 2 full turns to the preload and that was bang on so will do that again on Pearl.   

Posted by Vulcanpunch
 - January 28, 2018, 16:47:57 PM

Reading some of your past threads regarding the front springs, a lot of you guys opted for the 1500 due to being a better spring (built for more wight). Looking at the web site, I don't see an option for an 800 drifter, just 1500. I'm assuming that the front ends of the 1500 and 800 are basically interchangeable. The only question i guess is why add the 0.5 spacer? Maybe i'm missing something.

Posted by Vulcanpunch
 - January 28, 2018, 16:33:53 PM
Quote from: CDNRatMan on January 28, 2018, 15:18:45 PM

Let me refresh everyone on this I am swapping the stock springs out for springs for a 1500 and have added 0.05 " to the spacers so instead of 3.5" I am going with 4" and sticking with 10 w oil and the recommended amount.

Question, does progressive not make front springs for the 800? Is that why you had to increase the spacer by 0.5 in?

Posted by CDNRatMan
 - January 28, 2018, 15:18:45 PM

  Let me refresh everyone on this I am swapping the stock springs out for springs for a 1500 and have added 0.05 " to the spacers so instead of 3.5" I am going with 4" and sticking with 10 w oil and the recommended amount.

SMF spam blocked by CleanTalk