Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Vulcanpunch
 - January 29, 2018, 17:58:44 PM
Quote from: RockinRollin on January 29, 2018, 08:19:11 AM

Just curious, does your 800 have the rear swing arm like a Drifter? Also the plastic fenders off a Drifter won't take much weight, just sayin,..

No, the non drifter 800 comes with a different swing arm. That is one of the differences. Thankfully I picked a swing arm off a drifter a while back ago. So we should be good to go on that part.

Posted by RockinRollin
 - January 29, 2018, 08:19:11 AM

Just curious, does your 800 have the rear swing arm like a Drifter? Also the plastic fenders off a Drifter won't take much weight, just sayin,..

Posted by tj
 - January 29, 2018, 02:57:06 AM
Quote from: Vulcanpunch on January 26, 2018, 21:07:15 PM

Front wheel is laced. It was more of a pain then the aft wheel because of the spoke pattern. I'm sure there is a specific order in which to start but as a newbie I had to unlace and relace alot. The best advice I can give is to have a picture of a rim in front of you so you can copy that.

Nice job!
Posted by greenbarn
 - January 28, 2018, 22:10:26 PM
Quote from: CDNRatMan on January 28, 2018, 19:49:34 PM

:o  We will assume that this is a chain driven bike. Have you seen what your sprockets are? If it is 17/40 configuration you should then consider swapping them to a 18/38 comb for highway riding.

Agree...   second of the top 3 800 upgrades

Posted by CDNRatMan
 - January 28, 2018, 22:00:51 PM

  Should be stamped on it where you can see it......

Posted by Vulcanpunch
 - January 28, 2018, 21:13:06 PM
Quote from: CDNRatMan on January 28, 2018, 19:49:34 PM

:o  We will assume that this is a chain driven bike. Have you seen what your sprockets are? If it is 17/40 configuration you should then consider swapping them to a 18/38 comb for highway riding.

Thanks for the heads up. I'm sure the front is 18 but I'll need to double check the back tomorrow.

Posted by OR Seedman
 - January 28, 2018, 20:36:17 PM

yeah...mentioned that to him while he was visiting and picking up the exhaust..... ;)

Posted by CDNRatMan
 - January 28, 2018, 19:49:34 PM

 :o  We will assume that this is a chain driven bike. Have you seen what your sprockets are? If it is 17/40 configuration you should then consider swapping them to a 18/38 comb for highway riding.

Posted by CDNRatMan
 - January 27, 2018, 19:52:51 PM

 :o  Ok so you lads are learning fast no pictures it never happened, but which is which who is the older looking gentleman and who is the shavetail.........lol.....

you should have seen his 800 it is even better looking.....

Posted by Vulcanpunch
 - January 27, 2018, 16:50:48 PM

Picked up the exhaust from OR Seedman, he showed me his 1500 which looks super nice, and gave me since tips on my build and how to kill mold on your grass...copper sulfate!

Posted by CDNRatMan
 - January 27, 2018, 12:50:03 PM

 8)  ok and they start....lol.......be nice.......

Posted by greenbarn
 - January 27, 2018, 10:01:46 AM
Quote from: CDNRatMan on January 26, 2018, 23:27:46 PM

I always post questions and thoughts on here, of course you will get the odd person with a dumbass comment but .........
HEY, I resemble that remark.... ;D
Posted by CDNRatMan
 - January 26, 2018, 23:27:46 PM

  Ok just saw that your ride is a 95, so it is well aged. One way to check the dampeners is to lean the wheel over to the hub side and if the hub slides out time to replace the dampers. When you put it together, the hub should b hard to press into place it should not just slide in....want a tight fit. This will prevent that clunking sound from the rear end when you accelerate or slow down.

With a 23 year old bike and doing all this work to replace the rear shock can not be a bad thing either, I will be doing that as soon as I have the front springs replaced. Suspension is really important in my mind on any bike, and never skimp on the parts, same as tires.

I always post questions and thoughts on here, of course you will get the odd person with a dumbass comment but for the most part you get some really good info and some really awesome ideas.........

Posted by Vulcanpunch
 - January 26, 2018, 23:00:52 PM
Quote from: CDNRatMan on January 26, 2018, 22:49:27 PM

:o more work then I would care to take on. Depending on the year take a look at your rear hub damper's and see if they need to be replaced at this time.

lots of fun to met other Drifter riders and to put a face to a name.

with blue rims it sort of limits you to the colour of the bike eh!............

Good call on the rear hub dampeners, just took a look at them and they look like they need replaced. Also, maybe I should go ahead and replace the rear mono shock with a progressive mono?
You guys are awesome, I appreciate your input. Sometimes you have your head wrapped around just one thing that you forget to check other stuff even if its in front of your face.

Posted by CDNRatMan
 - January 26, 2018, 22:49:27 PM

 :o more work then I would care to take on. Depending on the year take a look at your rear hub damper's and see if they need to be replaced at this time.

lots of fun to met other Drifter riders and to put a face to a name.

with blue rims it sort of limits you to the colour of the bike eh!............

SMF spam blocked by CleanTalk