GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by rob f
- January 17, 2018, 09:00:36 AMI spotted right off the bat because just yesterday I lifted up that flap to see where that adjusting bolt was. looks like it may not be that accessible from the correct position either. I see that yours is set at 7. How does it ride at that setting?
Posted by CDNRatMan
- January 17, 2018, 00:42:30 AMit is not upside down it is 180* the wrong way. There is no way to get to the nut to adjust the settings.........
Posted by Tfrank59
- January 17, 2018, 00:08:15 AMSo it's upside down right? Why would that be a problem unless you can't get access to adjust it?
Posted by CDNRatMan
- January 16, 2018, 21:41:22 PMLOL yes Troll you got it and OR attention to detail....not sure how or why it happened....but yes when I put the new shock in it will be the correct way........lol.......
Posted by OR Seedman
- January 16, 2018, 19:16:46 PMsomeone really didn't pay attention when they put the shock back in after removing it for some reason...... 
Posted by Troll
- January 16, 2018, 18:29:43 PMYou rebuilt the whole linkage on the red one, so putting the monoshock back in going the correct way should be a piece of cake...
Posted by CDNRatMan
- January 16, 2018, 17:53:25 PM Well the other morning it was about 0430 and I was still awake and tinkering on Pearl. I had removed the plastic mud flap that is between the rear wheel and the shock. I then noticed something that had me scratching my head and trying to fathom what I was seeing. So I went off to bed and got ap a few hours later and went and looked again....and yup there it was just like a slap on the forehead.
Can anyone else see the issue I found ..........