Modify message

Welcome to Vulcan Drifter Riders. Please log in or sign up.

Main Menu

Vulcan Drifter Riders
► DISCUSSIONS
► Drifter 800 Only
► Modify message ( Re: Solo seat driver backrest )

Modify message

The message has the following error or errors that must be corrected before continuing:: Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.

Subject
Message icon
Reason for editing

very comfortable....

I have yet to see any of the springer solo seats sold on ebay or anywhere else that are really "plug and play".  Everyone that I have researched where you can actually see a picture of the bottom of the pan for the mounting points will not mount without some modification....

I have mounted mine with a flat steel plate that the springs are mounted on.  The plate is then mounted to the cross-member under the seat area.  The difficulty with mounting to the cross-member is that you have to remove the electronics to tighten down any nuts that you attach to the bolts that go through it.  I solved this issue by drilling out the holes and putting in #6 nutserts (threaded rivets).  Now I can detach the entire seat and plate in about 5 minutes with just 3 bolts - two on the cross-member and one on the tank mount.  Ratman has said that he is looking at doing his the same way, although now I think he is going a different route...

the only issue I found was that I needed spacers between the saddlebag mounts and the frame (if not using the seat brackets) to keep the saddlebag mounts from hitting the rear bumper when it moves up and down.  I either leave the seat brackets on or use a couple of blocks of UHMW that I have drilled out for this purpose.....

Attachments: (Clear attachments)

Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB

Uncheck the attachments you no longer want attached

Click or drag files here to attach them.

Insert width (px):

Insert height (px):

(Clear attachments)

Other options

Lock this topic
Return to this topic
Don't use smileys
Move this topic

Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by mittico68

- January 07, 2018, 11:18:10 AM

Quote from: Tfrank59 on January 07, 2018, 11:08:35 AM
If you're correct, I don't think I want to trust a person who writes this on their website: "For DRIFTER 800 - NO modifications are needed. The seat is a Plug & play Installation."

Yeah, and not to mention the huge price he's askin'...

Posted by Tfrank59

- January 07, 2018, 11:08:35 AM

Quote from: mittico68 on January 07, 2018, 04:53:53 AM
As far as I remember, there must be someone over this Forum who bought one from Singh and he said that it's not really a bolt-on seat, because it needs some little mods to fit an 800...

If you're correct, I don't think I want to trust a person who writes this on their website: "For DRIFTER 800 - NO modifications are needed. The seat is a Plug & play Installation."

Posted by mittico68

- January 07, 2018, 09:07:02 AM

Quote from: OR Seedman on January 07, 2018, 08:12:03 AM
I did come up with a springer seat setup for the backrest. here is a pic of how I use it on my 800....

Now that's definitely a cool (and comfortable, I guess...) setup!

Posted by OR Seedman

- January 07, 2018, 08:12:03 AM

mittco:

I did come up with a springer seat setup for the backrest. here is a pic of how I use it on my 800....I

Posted by mittico68

- January 07, 2018, 04:53:53 AM

As far as I remember, there must be someone over this Forum who bought one from Singh and he said that it's not really a bolt-on seat, because it needs some little mods to fit an 800...

Posted by Tfrank59

- January 06, 2018, 22:14:14 PM

Has anyone bought one of these seats from this person? I'm curious if it bolts onto an 800 as advertised and if it's comfortable. Thanks.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192396598260

Posted by greenbarn

- November 24, 2017, 09:39:57 AM

I do believe you're in luck.... I think our own OR Seedman is selling various racks and backrests. I have a Corbin on my 1500 and had a Corbin for the 800 but sold it. They are really nice, but like you said expensive. If you can find them used, they are about half of new.

Otherwise, check out OR Seedman's stuff:

http://www.vulcandrifterriders.com/forum/index.php?topic=46969.0

Get in touch with him, and I'm sure he can help you out.

Posted by Tfrank59

- November 23, 2017, 21:46:41 PM

So I know some of you have like a Corbin solo seat that has a driver backrest, how much did you have to give for that thing? The prices I'm seeing seem out of this world $500 plus dollars. So unless there's something a little more reasonable out there, I'm thinking about taking on a winter project of adapting a generic driver backrest and building my own brackets but boy does it look like a lot of work. has anybody ever done it? I don't want to reinvent the wheel if it's already been done and someone could give me a few pointers or even better some specs. Thanks for any help you can give

SMF spam blocked by CleanTalk