GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Zoar
- October 17, 2017, 09:14:54 AMQuote from: RockinRollin on October 17, 2017, 08:03:36 AMI concur.Man, what a steal! if you can get it running you have an awesome deal there. The only thing it needs is some larger hard bags maybe other than that why would you screw with it?
What a deal!
That bike looks pretty sweet. I would change the bags too; hard bags in same color scheme as the bike. Then you can sell it to one of the members here for what you have into it... Bahahahahahahaaaaaaaa! (had to).... But really great looking bike and great deal you made happen!
Posted by RockinRollin
- October 17, 2017, 08:03:36 AMMan, what a steal! if you can get it running you have an awesome deal there. The only thing it needs is some larger hard bags maybe other than that why would you screw with it?
Posted by OR Seedman
- October 14, 2017, 18:32:12 PMwell...the 1500 arrived today and I have to say that it looks better than I thought it would....just a couple of very minor paint chips on the front and rear fenders....otherwise in really good shape..I will start tearing into it later this week....man, though, it has A LOT of CHROME!...forks, grips, triple tree, every possible cover on anything and ...wait for it....a CHROME FRONT ROTOR!! the guy must have been nuckin' futs over chrome..LOL.
The Vance & Hines Longshots have been de-baffled completely, though. I will definitely need to fix those as it is really loud with straight pipes.....
Posted by Trall
- October 05, 2017, 15:06:09 PMQuote from: OR Seedman on October 05, 2017, 13:48:41 PMThat's part of the fun, making choices and working on your bike. I would call several autobody guys and get their prices for a tank and two fenders. Ask sometimes their painter does side work on motorcycles. I had a 800 and 1500 Drifter fenders and tanks done in the past for around $500 and the other for $750 in the two tone paint that I picked.Yeah, the paint is a problem...especially since they did the frame, too. Would require a complete strip down to the frame...not sure I really want to tackle that this winter. It might be worth it to fix the bevel gear bearing and then sell it off in parts...like you said, there are some hard to find parts on it that would easily cover the cost, even before I sell the complete engine. Engines alone are going for $800-1500 depending on the miles and condition. BUT...I still would like a 1500 of my own to go with the 800....I'll make some decisions this winter after I repair the bearing and see what else, if anything, is wrong with it....Maybe I should just tape off the speedo face and spray the whole thing flat black with plasti-dip..LOL
The frame you can brush on or small mini roller on POR-15 which is a true black or Rustoleum Hammered Black has a slight grey hue to it. Both looked great on the frames I've painted. Depending on the look you want, the Rustoleum Hammered Black gives you a little dimension to the paint. At Walmart I can buy a very small mini roller, comes with smooth and nap mini roller, handle and paint pan for $3-4 bucks. Use the nap one for added dimension.
Posted by Old Drifter
- October 05, 2017, 14:40:35 PMQuote from: OR Seedman on October 05, 2017, 13:48:41 PMNice score on the 1500! You could probably do a decent job on the frame with some rattle cans.Yeah, the paint is a problem...especially since they did the frame, too. Would require a complete strip down to the frame...not sure I really want to tackle that this winter.
Posted by OR Seedman
- October 05, 2017, 13:48:41 PMYeah, the paint is a problem...especially since they did the frame, too. Would require a complete strip down to the frame...not sure I really want to tackle that this winter. It might be worth it to fix the bevel gear bearing and then sell it off in parts...like you said, there are some hard to find parts on it that would easily cover the cost, even before I sell the complete engine. Engines alone are going for $800-1500 depending on the miles and condition. BUT...I still would like a 1500 of my own to go with the 800....I'll make some decisions this winter after I repair the bearing and see what else, if anything, is wrong with it....Maybe I should just tape off the speedo face and spray the whole thing flat black with plasti-dip..LOL
Posted by Trall
- October 05, 2017, 09:25:02 AMQuote from: OR Seedman on October 03, 2017, 10:29:05 AMGreat deal. I saw that one on Ebay and with shipping costs sounds like a good deal. With your dollars saved you could get the paint job you love. That color combo is different not is a good way but somebody loved it. Maybe a female owned it. You got some great accessories, Rear pass floor boards worth 200-350, factory 1500 Seat rail worth 200-400, solo seat saddlebag struts and horseshoes worth 150-250, so those alone on the high side covered what you paid. Whats better then a Drifter? Two Drifter's. Post up and you make it yours.......like Ratman, I decided I need another one, too...so I bought a 2001 1500 on ebay auction that has a bad bevel gear bearing....total cost including shipping to my location is $1,370.00. I have already ordered the new ORS bearing (which I bought from a real bearing vender...not one of the oem crap Koyo bearings...) for $10 wholesale. Total parts will be around $30. Looking at the bike pics, someone invested a lot of time and money in paint and chrome.....not crazy about the paint, but for the low $ I spent, I can live with it...although I am not quite sure what I will do with it when it's fixed....I really like my 800...
Posted by RockinRollin
- October 05, 2017, 09:07:16 AMThe Ratman is getting another Drifter? If only!
Posted by OR Seedman
- October 04, 2017, 10:15:12 AMProbably more like welding goggles..... 
Posted by mittico68
- October 04, 2017, 01:42:27 AMNice (and cheap...) catch, Seedman!
But I guess you'll need to wear sunglasses to ride her, in a sunny day... 
Posted by OR Seedman
- October 03, 2017, 14:11:10 PMDepending upon what kind of shape the paint is actually, I my keep it as is and take it to some bike shows.....I am sure it will require some detailed cleaning up, but it is an unusual paint scheme....even the frame looks like it has been powder coated to match...and there is a ton of chrome on it....chrome forks, saddlebag mounts, shifter, grips, etc....someone went off the deep end with chroming it...even I don't go that far..LOL
Posted by Pilgrim
- October 03, 2017, 13:36:56 PMMan..that is nice and a great deal. I would have it painted.
Posted by OR Seedman
- October 03, 2017, 10:29:05 AMlike Ratman, I decided I need another one, too...so I bought a 2001 1500 on ebay auction that has a bad bevel gear bearing....total cost including shipping to my location is $1,370.00. I have already ordered the new ORS bearing (which I bought from a real bearing vender...not one of the oem crap Koyo bearings...) for $10 wholesale. Total parts will be around $30. Looking at the bike pics, someone invested a lot of time and money in paint and chrome.....not crazy about the paint, but for the low $ I spent, I can live with it...although I am not quite sure what I will do with it when it's fixed....I really like my 800... 
Posted by Tfrank59
- October 03, 2017, 09:22:37 AMQuote from: CDNRatMan on October 02, 2017, 16:40:28 PMhope you're getting a killer deal. post Pics when you can.Well if all is well Tfrank I'll be travelling this Thanksgiving weekend 6 hours south to pick up a second Drifter 800 and so hoping all goes well.......
Posted by Pilgrim
- October 02, 2017, 20:34:22 PMone for the bedroom...