Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by drifter-paul
 - September 23, 2017, 06:07:14 AM

Interesting to know the thickness of the original undrilled drifter rotor compared to the Classis. I replace my front rotor with OEM drifter. Just to know for next time.

Posted by CDNRatMan
 - September 18, 2017, 13:22:29 PM

 :o well been riding with the rotor off the 2000 Vulcan Classic for 3 summers now

Posted by chief
 - September 18, 2017, 10:37:20 AM

I'll be adding anything you guys come up with to the cross reference. Please be sure you have personal knowledge of this stuff.

And thanks.

Posted by BlackBlueMagoo
 - September 16, 2017, 15:44:05 PM

I had a Damaged front caliper with a stuck piston and the handlebar master cylinder had severe road rash. I replaced the entire front brake system with one off of a Vulcan Classic. Mine was a 99 1500 Drifter and the replacement was from a 02 Vulcan Classic. During the replacement I observed that the Caliper Holder for the Vulcan Classic is flat, and the Caliper Holder on the 1500 Drifter has a 1 3/8 stand off....otherwise the 1500 Vulcan Classic and the 1500 Drifter are the same! Change out the Caliper Holder and your good to go! FYI.

Posted by CDNRatMan
 - September 15, 2017, 15:15:04 PM

Classic brake rotors will interchange between the 800's.

Posted by chief
 - September 15, 2017, 12:25:18 PM

If the p/n's are the same they are interchangeable. Most things on the Classic can be used by the Drifter... but you need to check.

Here is a cross-listing we are still developing. Anyone who has information to be added please provide that info so we can add to the listing.

http://www.vulcandrifterriders.com/vcross.html

Posted by Old Drifter
 - September 12, 2017, 19:20:11 PM

Check on the Partzilla site. Good source of information. It looks like the part numbers are the same.

Posted by BlackBlueMagoo
 - September 12, 2017, 19:00:19 PM

Will the Ignition Switch and Locking Fuel Cap from a Vulcan Classic work/fit on a 99 Drifter J..? Are parts inter-changeable between the two models..and what years will fit what? Thanks.

SMF spam blocked by CleanTalk