Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by OR Seedman
 - September 20, 2017, 07:55:36 AM

you're right, Ratman.  it should be on the lowest point of the bike, but so far, it seems to work where it is....it was mounted there by the original owner and I haven't moved it yet....but when I do my winter tear down, I will relocate it to the proper point.... ;)

Posted by CDNRatMan
 - September 19, 2017, 23:34:56 PM

  Looks really good but the only issue I have is with your gremlin bell.

The Gremlin bell can not work correctly unless it is just above the road surface. So OR you need to move the bell lower on your bike.

Posted by OR Seedman
 - September 19, 2017, 19:24:54 PM

no room for mirror integration...speakers take up all the room...lol

got the spotlights mounted..I had a small piece of chrome steel with bent up tabs at both ends....cut it in half, drilled some holes and viola! mounting brackets.....

Posted by Pilgrim
 - September 19, 2017, 11:57:26 AM

would be cool if you could incorporate the mirrors into the fairing. Looks good man, bet that cuts down the wind on you.

Posted by mittico68
 - September 19, 2017, 02:34:33 AM

It looks really good!
Now you should think about match paintin' those crashbar covers...  ::)

Posted by OR Seedman
 - September 18, 2017, 22:56:53 PM

ya know....I auto corrected the orientation of the pictures on my pc BEFORE loading them and they all turned 90 degrees when you zoom them.....so I set them back to the original orientation...now the look like they do on my pc, but when you zoom on them they rotate to the correct view...

by the time I got everything together on this, I am into it about $500 including paint...works for me

Posted by CDNRatMan
 - September 18, 2017, 21:31:22 PM

   :o I remember a time when people were smarter than their phones.......oh sorry....wrong subject.....but OR that does like nice.

Posted by OR Seedman
 - September 18, 2017, 21:00:24 PM

Vector Batwing fairing for Vulcan 1500 Classic....took some work but is now mounted up...Pioneer 450 watt 6x9 speakers, Boss Mechless BT audio (240 watt), waterproof quick-connect wiring...and I painted it myself with spray cans....was looking really nice until it fell off of the stand and smacked into the floor at my research farm office...over the weekend while I was away...fixed it as best I could....still looks okay.  I do need to make some new mounts for the spotlights....they need to be moved forward about 1" to keep from hitting the fairing....

The only real issue with mounting the fairing is that if you use the mounting holes on the parts that came with it, it sits about 1.5" too high over the headlight.   I drilled new holes in the upper mount that attaches to the upper fork tree and drilled new holes in the lower mounting pieces that are attached to the fairing....can't use the quick connect mounts on the lower holes as they have to be mounted directly to the side holes on the forks....but I got it sitting on there pretty good.....now I need it to quit raining so I can try it out at highway speed.

Posted by OR Seedman
 - August 20, 2017, 19:12:24 PM

ok...so I did the upper tree swap yesterday.  The only issue is that the cable routing stays don't fit because the handlebar mounts on the 1500 tree as set back about 1/2" more than on the 800 (more in line with the center bolt)  So, the one piece cable routing stay can't go back far enough to bolt to the underside of the handlebar mounts.  I have left it off for now, but I think I will cut it in half and then it should work.  Otherwise, no issues at all with it bolting right in place.....so now I have the upper tree needed to bolt on a batwing fairing for any 1500 classic....now I gotta save the $$  to get the one I want...

I can't add any pics yet because I am waiting on a new phone....mine camera in my phone is still not working correctly...

Posted by greenbarn
 - August 19, 2017, 22:36:20 PM

Waiting patiently for those pics.

Posted by chief
 - August 14, 2017, 10:53:34 AM

There are several mods relating to the bat wing fairing. Downloadable PDFs are there as well.

  • Vulcan Drifter Riders >
  • Links >
  • Mods, Tips, Maintenance >
  • M/T - Windshields, Fairings and Lowers

http://www.vulcandrifterriders.com/chuckfairing.html

Posted by CDNRatMan
 - August 13, 2017, 19:47:58 PM

Well if anyone can do it I think you have a decent chance of making it happen....

Posted by OR Seedman
 - August 13, 2017, 16:07:09 PM

I am also looking at putting on a batwing fairing....maybe a Vector one for a Vulcan 1500 classic.  I have ordered the top of the fork tree (used) for a Vulcan 1500 classic to swap out with the stock one on my 800.  the measurements are identical, but the Classic has 2 threaded holes in the front that the fairing bracket needs to mount to.  If that works out, the fairing will mount right on with the provided mounting brackets....I may have to remove the spotlight bar, though, and put a regular turn signal mounting bar on instead....I will cross that bridge when I get to it....this will be a winter project....I will try to get the fairing installed with full stereo by spring....going to paint it myself with the oem color.  (I already re-painted my rear fender after gouging the crap out of it with too long bolts on the 2-up seat)  I will document with pics as the project comes along....I really want the "bagger" look on my bike...

Posted by chief
 - August 09, 2017, 16:27:22 PM
Posted by Scott Luck
 - August 09, 2017, 01:50:08 AM

I read some info online today that a fairing for a Vulcan classic 1500 should fit a drifter with some slight modifications. Anyone know more about this?

SMF spam blocked by CleanTalk