Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by JagLite
 - September 08, 2017, 15:44:54 PM

I'm at work so can't check my bike, but I think the center indicator light is for the turn signals.
Do your signals work correctly?

Posted by Bucko
 - September 08, 2017, 00:49:56 AM

I've read, but not tired, dropping the caliper in Boiling water for a while then try the air or grease (careful though, it will be hot!).  The hot water does two things: expands the aluminum caliper more than the steel piston and (the part I'm not sure is true) helps dissolve some of the crud that forms from the interaction of the brake fluid/moisture and the caliper/piston.

Posted by BlackBlueMagoo
 - September 07, 2017, 17:18:17 PM

I've been working on a 99/1500 Drifter for some time now..living on SS and always a little short on cash..Today I took the bike out for my first ride on it..motor runs good and trans shifts OK..90% seems to work OK..but the center dash light starts blinking after it warms up..and I do not know what is causing it! The repair manuals that I have say Zero about the dash lights or what they are for!
Also..I have a front Caliper Piston(dual piston) stuck...tried air..pumped in grease..its stuck but good!
Any/All Ideas will help. Thanks.

SMF spam blocked by CleanTalk