GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Old Drifter
- June 26, 2017, 18:22:25 PMQuote from: Troll on June 26, 2017, 15:15:46 PMAre the four stand-offs the same size (long)? The two front ones in particular.There are four stand offs that attach to the engine. The cover attaches to them
Posted by RockinRollin
- June 26, 2017, 16:26:14 PMI've got the part, problem is time to work on it. We are in the midst of home renos and I've been painting and laying flooring. I really want to do this and a few other mods before the Drift Inn .
I'm thinking about installing lowers and crash bar inserts to block the wind also but they may not happen in time.
Should I just say to the wife " Sorry bike comes first"? I know Ratman would have good marital advice.
Posted by Troll
- June 26, 2017, 15:15:46 PMQuote from: Old Drifter on June 26, 2017, 14:51:16 PMLet us know how it's going. I'm thinking the 2001-up stator cover may also be needed. The two forward bolts won't be long enough to thread in with the '99-'00 cover...too short.
There are four stand offs that attach to the engine. The cover attaches to them
Posted by Old Drifter
- June 26, 2017, 14:51:16 PMQuote from: RockinRollin on May 26, 2017, 05:11:38 AMLet us know how it's going. I'm thinking the 2001-up stator cover may also be needed. The two forward bolts won't be long enough to thread in with the '99-'00 cover...too short.According to the pictures the only thing missing is some threaded spacers part 92151 in the pdf below. The ad said it would fit but we will see.
BTW that was $50 US and it will cost another $40 to ship.
Posted by Trall
- June 24, 2017, 19:40:31 PMA cover looks good but IMO the 99-2000 look more old school without one. Another major negative is what a pain to flush/bleed out your clutch fluid. On my 2001 and up, you have to remove the left side floor board and foot shifters and other parts just to get to the clutch bleeder.
I now also have a 2000 1500 and Love the looks of the engine and just bleed my clutch fluid with no issues and no cover. Looks more retro and old school.
Posted by RockinRollin
- June 06, 2017, 08:22:36 AMMine came in the mail about 3 days ago, haven't had a chance to look into it but I think it bolts right on. I'm going to powder coat the outside cover black and spray bomb the inside cover metallic red.
Posted by Old Drifter
- June 05, 2017, 22:37:55 PMQuote from: RockinRollin on May 26, 2017, 05:11:38 AMI've been looking into this since your post. I'm pretty sure that they will fit perfectly. I just ordered a used one and I think it (the one I ordered) comes with the spacers. I'll let you know how it goes. I plan on painting it the flat silver/aluminum to match the right side cover. Thanks for the idea.According to the pictures the only thing missing is some threaded spacers part 92151 in the pdf below. The ad said it would fit but we will see.
BTW that was $50 US and it will cost another $40 to ship.
Posted by RockinRollin
- May 29, 2017, 07:34:18 AMMaybe someday.., 
Posted by DC
- May 27, 2017, 16:43:43 PMQuote from: RockinRollin on May 26, 2017, 08:09:50 AMAs they say, just about anything can be fabbed. If you have the engineering skills, which I know you do, time and money are the only limitations.To DC, Yeah I love that bike to. So much so I bought a set of Buco bags and was going to install them but couldn't figure out how to paint them since I went with a 2 tone paint job. In many ways that bike is the Holy Grail of Drifters. Every time I look at that bike I see something new. Who was the original owner, anyone know? Dave somebody? If I had the funds I would try and make that bike from an 800. But the dual exhaust would be the main obstacle. With a single exhaust it would cause the bags to sit too high and wouldn't look right. But with the 800's you could pull the bags in tight since there is no shocks on the outside.
Posted by Old Drifter
- May 27, 2017, 16:26:35 PMQuote from: RockinRollin on May 26, 2017, 08:09:50 AMRockinRollin, go fo it and make it happen! You only live once.To DC, Yeah I love that bike to. So much so I bought a set of Buco bags and was going to install them but couldn't figure out how to paint them since I went with a 2 tone paint job. In many ways that bike is the Holy Grail of Drifters. Every time I look at that bike I see something new. Who was the original owner, anyone know? Dave somebody? If I had the funds I would try and make that bike from an 800. But the dual exhaust would be the main obstacle. With a single exhaust it would cause the bags to sit too high and wouldn't look right. But with the 800's you could pull the bags in tight since there is no shocks on the outside.
Posted by RockinRollin
- May 26, 2017, 08:09:50 AMTo DC, Yeah I love that bike to. So much so I bought a set of Buco bags and was going to install them but couldn't figure out how to paint them since I went with a 2 tone paint job. In many ways that bike is the Holy Grail of Drifters. Every time I look at that bike I see something new. Who was the original owner, anyone know? Dave somebody? If I had the funds I would try and make that bike from an 800. But the dual exhaust would be the main obstacle. With a single exhaust it would cause the bags to sit too high and wouldn't look right. But with the 800's you could pull the bags in tight since there is no shocks on the outside.
Posted by RockinRollin
- May 26, 2017, 05:11:38 AMAccording to the pictures the only thing missing is some threaded spacers part 92151 in the pdf below. The ad said it would fit but we will see.
BTW that was $50 US and it will cost another $40 to ship.
Posted by CDNRatMan
- May 25, 2017, 20:54:29 PM 
Wait till you see Uncle ronny's bike it is awesome, if I had a 1500 his would be cool....bu it has far to much chrome on it...hurts my eyes......I needed my sunglasses in the garage......
Posted by DC
- May 25, 2017, 19:45:46 PMQuote from: RockinRollin on May 21, 2017, 20:05:32 PMI love that bike.I know it can be done, here is a picture of Glen Bakers bike which is obviously a 99 or 2000 with the left engine cover guard.
Posted by CDNRatMan
- May 25, 2017, 12:39:24 PM 
Uncle Ronny, etiquette dictates that you must, sorry you MUST always post follow ups on any mods or changes you make because one never knows when that mod or change will be considered or needed by another.....and you do make them fun to watch......lol.....