Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by pcarrell
 - January 05, 2017, 14:33:52 PM

Well, here's a full breakdown of the parts involved: http://shop.ronayersmotorcycles.com/fiche_section_detail.asp?section=388661&category=Motorcycles&make=KAWASAKI&year=1999&fveh=8971

Beyond that, our own Greenbarn has delved deep into those front forks and recorded his adventures.  That should help!  http://www.vulcandrifterriders.com/forkspringpg1.html

Posted by jamman
 - January 05, 2017, 13:47:41 PM

All

Recently acquired a '99 Drifter and the previous owner had leather covers made to go over the top of the forks, there are no lower fork covers on it ..

I detected that the front suspension needed work before I bought and I knew a rebuild would be in order .. I took off the leather cover and confirmed what I suspected that the seals are shot .. likely very low on oil

I have some progressive springs and fork seals (no wipers) on the way ..

Questions:

1) are the lower fork covers required ? Seems like they are given there is nothing to cover the open end of the tube to keep stuff out

2) beside a new fork seal and oil, any other parts needed from what you can see in the picture ?

Thanks !
Drifter Gary (jamman)
SMF spam blocked by CleanTalk