Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by TC
 - September 15, 2010, 10:30:07 AM

Thanks for the offer Vrooom. I will keep it in mind. As of now I came in the house and calmed down a little then went back to th garage. Cleaned up the contacts and got it back together. Works for now, will see how it goes. I don't usually take stuff apart I know nothing about but for $177  :o I thought I would give it a shot. ;)

Posted by Varooom
 - September 15, 2010, 04:20:42 AM

I have the assembly (my turn signals are kerflewi from a Kawasaki security system install years ago and I'd bought a new one to see if it helped; it didn't) and will mail it to you for $70,
Varooom

Posted by 49Reo
 - September 14, 2010, 18:36:48 PM

I ran into the same problem with my Harley; the brake switch broke in the handlebar mount, was a BIG dollar to purchase the entire assembly and harness, the only way it is available from a dealer. I scrounged around in my "junk" box, found an old switch assembly that had a good brake switch, and cut it out and soldered it into the harness on my bike. Kind of difficult to do due to small work area and big fingers, but I succeeded in spite of myself. If you can find a switch and are handy with a soldering iron, it should be a fairly simple fix. I did have a problem finding shrink tube small enough for the wires; had to go to an electronics shop for that.

Regards and such,
49 Reo :)

Posted by chief
 - September 14, 2010, 15:14:31 PM

Look at the parts drawings and see if you find the pieces you want.
buykawasaki.com or any of the oem parts vendors will have the parts diagram. I'd do it for  you, but am travelling at the moment with limited internet access.

Posted by TC
 - September 14, 2010, 12:52:56 PM

 I don't know if this is where this belongs but i figured more people would see it here. Feel free to move it if you wish.

My high/low beam switch is shot. I took it apart and now it is really shot.
Can just the high/low switch be purchased or do I have to buy the entire workings of the left side like my dealer said. $177 worth.

SMF spam blocked by CleanTalk