We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
The OEMs engineer, design and manufacture parts for the specific performance characteristics of their vehicles over long term. They do it to protect their warranty, their brand and their customers. I believe OEM is best and I always use OEM. Here's an excellent read on why: http://www.nicoclub.com/archives/kn-vs-oem-filter.html
Air filter k&n part is ka-1596?
yes, that is the one I am using.
Changed the air filter to a K&N, replaced the spark plugs, changed the oil and filter and the final drive oil tonight. Wow what difference. The Drifter runs so much better. The PO said he changed the oil...uh huh. He had it for 1000 miles. I havent seen oil that color since my 20's. You know, when I changed the oil every two-three years or so in my beater car.
The filter threw me off a bit because K&N is smaller in circumference than the stock filter. The weird thing that happened was after everything was done the bike wouldn't idle fast enough to keep it running unless the "choke" was pulled all the way out. Also the fast idle wouldn't adjust at all. We took the filter off while the bike was running and everything was fine.
put the cover back on and done with it. Anyone have this happen before?
Know how do you read oil levels? Every time I look at the glass oil site the levels always look low. The bike level and off when I check the oil level. I put in 3.3 quarts and hope that's enough. Final drive oil level...I think I have enough there too...
Air filter k&n part is ka-1596?
Quote from: Petemoss on April 17, 2013, 19:16:25 PMDeceleration popping, backfires... similar to exhaust gasket leak...I got 49 mpg on Sunday.
How would I know if I needed a fi box?
I wondered that myself...don't know but i would guess, and this is only a guess, read the plugs and see if it is running lean?
I thought mine may be running lean now that I replaced the air filter. Could that be the reason I got 50 mpg...don't know.
Anyone have any idea?
I got 49 mpg on Sunday.
How would I know if I needed a fi box?
I recently replaced my stock air filter with a K&N filter. Seems to be running great. I rode on a 225 mile ride last Sat. and got 50 mpg. I have stock exhaust.
Well, I put it in at the same time as my Big Willy's and needed an add-on FI box... I honestly don't think the filter had anything to do with that... I still have all the stock ductwork etc. in place.
The K&N does a much better job of filtering intake air with little maintenance.
Quote from: Troll on April 17, 2013, 17:14:19 PMI've seen debates that suggest more airflow=more dust and dirt in the engine. Is this a concern or much ado about nothing?The K&N in the stock airbox won't do anything but improve engine air filtration. The stock box is so restrictive, you'll never notice any difference
The K&N in the stock airbox won't do anything but improve engine air filtration. The stock box is so restrictive, you'll never notice any difference
Chief, with a k&n air filter will anything need p be tweaked so the bike runs okay? I have Roadhouse exhaust without baffles. Would more airflow require me to adjust the fuel injection?
Quote from: Petemoss on April 17, 2013, 12:36:42 PMHaven't a clue... !!! I just liked the filtering capacity and ease of maintenance.How did that effect performance/horsepower/mpg?
Quote from: chief on April 17, 2013, 12:34:33 PMHow did that effect performance/horsepower/mpg?I replaced mine with a K&N soon after I got the bike.
I replaced mine with a K&N soon after I got the bike.
Page created in 0.111 seconds with 15 queries.