Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by ernie
 - July 25, 2012, 22:13:39 PM

thanks again troll   :)  i had seen that picture before but i can't tell one part from another. your highlighting it lets me know what i need and where it goes. thank you again

Posted by Troll
 - July 25, 2012, 08:36:56 AM

I'm thinking the hi-lited parts are what's going to be interesting you. Worm gear, crown gear, and drive collar, all inside the rear backing plate.

Posted by ernie
 - July 24, 2012, 18:31:44 PM

i got a 6mm allen screw that goes in the hole. I got a new speedo and installed it but it still doesn't work. So I unhooked it in front lifted rear tire and spun it yet it doesnt spin the core. since it was a new cable i unhooked the rear part of cable and manuel spinned it. It spun!!! so it must be something dealing with the rear tire. what is the thing in the rear tire called that spins the cable??? and is there any posts about this too

Posted by Troll
 - July 22, 2012, 21:44:56 PM

Looks like there is a pin that needs to be tapped out...what's lurking in that hole in the boss?

Posted by ernie
 - July 22, 2012, 20:55:02 PM

some pictures to see if it is the same as a drifter

Posted by ernie
 - July 22, 2012, 20:46:08 PM

I have a regular vulcan 800 and the speedo went out. I did the test where i unplugged the cable from console and lifted rear tire spun it yet the cable didn't turn. So i ordr a new cable easy enough to see the path the cable takes went to unscrew the rear tire part of the cable but doesn't seem to just unscrew. Tugged on it a bit but didn't want to pull hard enough that may break it or do something dumb. So is it a unscrewing mechanism, pull harder or how is the rear of the cable suppose to unclip?
thanks for any input

SMF spam blocked by CleanTalk