Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by BRKHRT
 - November 13, 2011, 13:45:08 PM

My wife's Drifter had the same problem, the mainspring on the clutch plate assembly was weak, after I replaced it the problem was solved.

Posted by chief
 - October 03, 2011, 16:19:29 PM

Yeah, and that's the only adjustment for it, since its hydraulic.

Posted by waltervl
 - September 30, 2011, 02:53:46 AM

Not completely understand what your problem is but on the lever there is a adjustment knob with numbers 1-5. With that you can easily set the distance of the lever from the handle bar.

Posted by WARREN RHOADS
 - September 29, 2011, 22:37:41 PM

I have 2000 1500 Drifter. The clutch seams week, clutch does not slip but the clutch lever movement is less than .25 when released. Also cleaned the Master Cyl. and rebuilt the slave cyl.  bleed system no air in system.

This is my first Drifter

SMF spam blocked by CleanTalk