Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by drifter-paul
 - October 31, 2011, 21:53:47 PM

Hi all. I was registered with this forum a few years ago, but have forgotten my old login details. I remembered an article on Cam Chain Tensioner Extenders - should have printed it and used it earlier. Now it is too late.   :( Having refound the article by Tim Acree I checked my 1500 99' Drifter and i have 3/8" 10mm extension , Tim says 5/16" is OUT OF TRAVEL and he's right. It was full of oil.

My questions are  - 1 - is it easy to remove the 'spark plug tunnels'  and replace  ? Do use just use a 1 1/4" /32 mm hex slug inserted after              removing the spark plug?
- 2 -  any tricks for replacing the Cam Chain/checking if it needs replacing?

I'll locate my Clymer Vulcan "classic" 1996 - 1998 manual (closest I could get to a Drifter manual in 1999) and go thru that. However, any expertise/shortcuts from this Forum will be much appreciated .  :)
Many Thanks, drifter-paul (Australia)

SMF spam blocked by CleanTalk