GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Indian Drifter
- July 26, 2011, 20:00:01 PMI purchased a front fender that has some cracks in it. I got an epoxy form O'Reilly Auto Parts. It was in a syringe that mixed the 2 parts as you applied it. WORKED beyond my expectations!!! cost was like 6.90 per tube. I'll try to remember to stop and get a tube. I'm repairing another front fender to have as a back up.
Posted by greenbarn
- July 22, 2011, 16:33:05 PMYou might also check a local body shop you trust. I know they have some great commercial stuff they use for plastic bumper covers on cars - don't know if it would work on the fender. It might be far superior to a over-the-counter epoxy you might get at the local parts store.
Posted by cochise
- July 21, 2011, 22:14:14 PMAwhile back on one of the forums there was a discussion about repairing fender holes with epoxy. It would be the same type of repair. Check the forums , I know it was on there.
Posted by chief
- July 20, 2011, 13:35:15 PMI have no experience with repairing these fenders, but I know they have been repaired. I know some folks have used the epoxy type repair kits. You might look for a repair company in your area as well. I will see if I can find any info on this for you.
Posted by Dobber
- July 20, 2011, 10:00:30 AMI had something kick up under my front fender and it caused a crack about an 1 1/2" long along the lower back side. Has anybody had good results with the epoxy type kits or any other method? The crack is clean with no gaps and thinking I may need to drill small holes at the crack ends to prevent the crack from growing.