Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by GIBBY
 - April 11, 2011, 13:26:32 PM

Make sure that you have the holes in the cover properly aligned with the plastic studs and pull the cover towards the back of the bike. Check that you have the key turned so the latch aligns with the keyhole and push in and turn the key. The first few times are a little tricky, but if you take a good look at the parts you will see how it is supposed to work.

Posted by plevine1
 - April 11, 2011, 12:49:00 PM

Took off my tool box today for the first time and to my surprise found a Powercommander III. Person I bought the bike from never mentioned that.
Problem is trying to get the tool box cover back on. It just won't seem to seat back in place far enough for the lock lever to engage. Anyone else have something similar. Might use a wire tie just so the thing doesnt fly off while on the road.

SMF spam blocked by CleanTalk