Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by drifter-paul
 - July 31, 2017, 17:07:31 PM

Many thanks, Pilgrim ;D

Posted by Pilgrim
 - July 31, 2017, 07:28:49 AM

Here are the instructions and settings for FI2000 Drifter, I have Roadhouse exhaust so I had to tune mine alittle from the presets.
These settings are for Cobra exhaust.

Posted by drifter-paul
 - July 29, 2017, 05:46:18 AM

Didn't phrase that, very well. I meant I can buy a pre-set Roadster one cheaply, then set it to the Cobra Nomad/Drifter settings - if I know what they are, rather than starting from scratch to tune it. Anybody using a Fi2000r with Cobra or V&H exhaust and the EPA equipment removed(i.e. using toasters or marbles)

Posted by drifter-paul
 - July 23, 2017, 22:30:20 PM

I am looking at a Cobra Fi2000r for a Yamaha Roadstar. The r series has what look like plug in OEM connectors. Does anyone know if the last 3 digits of the model number are the actual settings for the bike e.g. Cobra says the pre-set Nomad is Model 08-0299. So is the 2 of 0299 the green light setting, the next 9 the yellow (3000 rpm up) and the last 9 is the red setting - top end ? As we have intake air temp and pressure sensors, I assume I would need a 'Closed Loop' one ?
Thanks  :-\

SMF spam blocked by CleanTalk