Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Troll
 - May 12, 2017, 19:09:33 PM

I use Valvoline 10-40 or 20-50 motorcycle conventional oil exclusively. 111,000 miles on the original clutch, as of this afternoon. I change oil EVERY 3,000 miles, which means 3 changes, sometimes 4 a year....

Posted by rwantin
 - May 12, 2017, 11:31:16 AM

That helps.  20/50 has been my standard but maybe not the best application here.  I always leave it in neutral and let it warm a bit while having a cig (not that one should smoke or anything).  ;D

Posted by jmbo
 - May 12, 2017, 08:50:46 AM

Not sure this matters but my sources say Drifters use 10w40 not 20w50 engine oil.  This may have something to do with your sticky clutch.  That said, I never leave my bike in gear when I park it for the night. When it is cold and if I leave in it gear it will always lurch forward when I hit the started even with the clutch level pulled. After I start it I let it idle in neutral with the clutch engaged. All is well after that.

Posted by rwantin
 - May 12, 2017, 08:22:55 AM

Thanks guys.  I did that, but will do it some more.

Thanks (again)!

Posted by Bucko
 - May 11, 2017, 22:45:30 PM

What Pilgrim said.

Posted by Pilgrim
 - May 11, 2017, 11:55:34 AM

pull the clutch handle in and out a few times before you put it in gear...found this helps after mine has set awhile.

Posted by rwantin
 - May 11, 2017, 07:16:43 AM

Hi,

So I appear to have a sticking clutch issue, that is, it doesn't disengage after sitting a few days.  I did a search here and it was enlightening.  Got home yesterday, without starting it, pulled the clutch in and put it in gear - no release.  After a little more rolling back and forth encouragement, I managed to unstick it.

Based on what I have read, not an entirely uncommon thing.  The bike only has 6700 miles on it, so it sat (A LOT), and it needed some sorting (I have never seen clutch slave fluid so black before).

The bike has fresh Mobil 1 20/50 V-twin synth.  I read that someone mentioned using Kawasaki oil, and that it helped.  Worth trying?  And if so, what weight?  A shame with the fresh oil already, but if it will help.

Is there anything else I should do?  Clutch slave is flushed with fresh fluid, seems fine.

Thanks much, great forum here. 

SMF spam blocked by CleanTalk