Ignition relocation

[vandor]

This is from Malcolm Wilson. If this is something that you want, please go to the kawasaki Drifter Riders facebook page at https://www.facebook.com/groups/kawasakidrifter/, and pm Malcolm Wilson. I've posted this here and on 6 different facebook drifter pages. If this is not allowed here then please move or remove it. Thanks

1500 IGNITION RELOCATION PLATE I have had some feedback on costs to manufacture the plate.. a lot depends on numbers.. 10 off.. the plate before final finish £35 15 off.. the plate before final finish £30 powder coat or professionlly polished £7.50 bracket £6.50.. you might be able to buy direct in the USA much cheaper incidentals, nuts/studs/spacer/cable £2.50 so say 68 $US for the US, if 6 or more I could pack and send to Mark Lockwood who would put in the US post.. so reducing significantly delivery costs.. so ball park 75$US delivered if more than 10 orders 70$US this does not allow for a matching cover for the choke knob £15 [19$US]. I will need to ask for a 25% deposit.. I have quite a few parts here asked for them, specially made.. then silence when I say the are ready.. including a specially adapted rectifier cover and 4 black Axle cover sets engraved with DRIFTER and one polished set with CLASSIC.. and a set of Red Spoke covers for the 800.. and a lovely polished kick starter unit..