Ground Connector Joint

Started by Doobby, November 20, 2017, 14:08:29 PM

Previous topic - Next topic

Bucko

Quote from: RockinRollin on December 19, 2017, 10:10:22 AM

At Bucko, are you saying that this electrical supply company sells the male and female electrical connectors that Kawasaki uses? I asked my Kaw dealer to look up the connectors and was told they no longer supply them for the Drifter, I have been using the Canadian Tire brand that are big and crappy for new electrical connections ( Canadian Tire = Crappy Tire?). :)

Eastern Beaver can supply the connector pins (not necessarily the connector shells but I think they will have at least some of them) - at least they did the last time I purchased a bag of pins - that was probably at least 10 years ago now.  I coudln't get any connectors or pins out of any of the local Kawi dealers.

Bucko

Quote from: drifter-paul on November 23, 2017, 02:41:05 AM

Bucko,

What year do you have ? I stripped my '99 and re-taped my whole wiring loom. I do not recognize this connector.

:)

Mine's an 01 but I'm not the one having the trouble (I'll add myself to the chorus of those that haven't seen that connector before_.

RockinRollin

At Bucko, are you saying that this electrical supply company sells the male and female electrical connectors that Kawasaki uses? I asked my Kaw dealer to look up the connectors and was told they no longer supply them for the Drifter, I have been using the Canadian Tire brand that are big and crappy for new electrical connections ( Canadian Tire = Crappy Tire?). :)


Pilgrim


greenbarn

Yea, where is that little sucker at?  I don't recognize it either.

No Worries

drifter-paul

Bucko,

What year do you have ? I stripped my '99 and re-taped my whole wiring loom. I do not recognize this connector.

:)

Knowledge is knowing a tomato is a fruit, wisdom is not putting it in a fruit salad.

Bucko

#2

Hello Doobby.

Whereabouts is the connector located - I'd like to have a look at mine.

Most of the Vulcan 1500 connectors are Furukawa - not sure about the one in your photo though.  I've had good luck sourcing Vulcan connectors and pins from Easternbeaver.com.  They are very good to work with.  I'd send him a picture of the connector to see if he can help with the shell and pins.


Doobby

Been chasing an electrical problem and found burnt connection at the ground connector joint. Jumpered past the connector to confirm that this was the problem and I think this was the solution.

Never noticed this joint/connector until now. 14 pins connecting all of the ground wires together. Has anybody had to replace this? I can't seem to find this exact same part, but have found similar.

Any insight would be appreciated.


SMF spam blocked by CleanTalk