floorboard mount (pictures needed) solved

draconarmy · August 02, 2013, 20:18:50 PM

ok so here is an update now that I finished. once I got the Kawasaki bracket (PN35011-1770) I then took the floor boards from my original post up to the local shop to find I needed a "clevis" bracket. I purchased a HD "engine guard peg kit (PN50964-98)" as it was all they had in stock with the female end of the clevis. I then had to grab a longer bolt from the back of the clevis to the bike bracket. drilled out the hole on the bracket to 1/2 inch (the size required for this particular kit) and installed the entire unit. I now have what it seems many of you are looking for..... full folding passenger floorboards.

work up here:http://www.vulcandrifterriders.com/forum/index.php?topic=24207.0

griz01 · July 21, 2013, 17:34:17 PM

Quote from: draconarmy on July 21, 2013, 16:35:37 PM
ok and assuming I have the stock pipes it should be free and clear to mount on right? I have heard some pipes use the peg mount. here is a pic of my pipes

Looks like it has the approx 1" square rubber plug on the mount, just remove it and you should be good to go!

Elmo Hayride · July 21, 2013, 16:50:42 PM

The bracket for the right is 35011-1974. Where did you get the 35011-1922 from?

draconarmy · July 21, 2013, 16:35:37 PM

Quote
Right side is also the Muffler mount. Should be on all Drifters already

ok and assuming I have the stock pipes it should be free and clear to mount on right? I have heard some pipes use the peg mount. here is a pic of my pipes

griz01 · July 21, 2013, 16:25:35 PM

Right side is also the Muffler mount. Should be on all Drifters already it just has a rubber plug filling the mounting hole

draconarmy · July 21, 2013, 15:44:01 PM

yeah found that and found out that I need 35011-1770 and 35011-1922 1770 is lh and 1922 is rh. gonna call the stealership tomorrow and see if they have any in stock. I'm just glad that the current Vulcans use the same part

Elmo Hayride · July 21, 2013, 15:38:49 PM

Try this
STAY, REAR STEP, Left Part Number: 35011-1770
STAY, REAR STEP, Right Part Number: 35011-1974

draconarmy · July 21, 2013, 14:08:58 PM

ok im finding the part but I cant tell if its right. the only pictures I can find of it are schematic view and it doesn't look quite right. I would hate to spend $40 on the wrong part. when I look up that part I get "stay rear step LH" this makes me think its just the Left Hand side don't I need both? I know this is short time, but im trying to have it ready by my trip to Sturgis on the 5th

griz01 · July 21, 2013, 11:43:42 AM

Bracket was only on two up Drifter, Classic, or Mean Streak. Any two up will have it. Kaw stills lists it as available #35011-1770

draconarmy · July 21, 2013, 07:54:23 AM

ok took another look at the pics I have of my bike and now I think I see another issue. it appears I don't have the bracket to install the boards or pegs. I have circled it below. does any one know where I can get these brackets I have tried searching online and cant find anything.

CDNRatMan · July 20, 2013, 22:27:26 PM

so looking at that the rear pegs are the same as the 800's so folding floor boards for a 1500 should work on a 800.

Elmo Hayride · July 20, 2013, 21:17:19 PM

Hope these help. Dave

draconarmy · July 20, 2013, 14:07:45 PM

ok so don't have the bike around but I am trying to order passenger floorboards but I don't know what the mount looks like. these are the boards I am looking at http://www.amazon.com/Emgo-Mini-Floorboards-54-48054/dp/B000XY4ZJ0/ref=sr_1_8?s=automotive&ie=UTF8&qid=1374343421&sr=1-8&keywords=passenger+foot+boards
but mostly I just whant to see pics of the stock mount point so I can see what im working with. 1500 only please